Through ongoing technology advancements, ship owners can protect their crew, vessels and cargo with smart Safeship® technologies.
Gaseous extinguishing systems protect important infrastructure against special hazards, fundamental for the safeguarding of critical facilities. A ship’s gaseous extinguishing system typically comprises between 200 and 600 cylinders each containing 45KG of CO2 under high 720 psi/ 49 bar pressure. (Other suppressant clean agents such as FM-200® and Novec™1230 are becoming more widely used.) One of the highest probabilities of discharge occurs during their maintenance. Some marine service companies estimate that 20% of a ship’s CO2 cylinders have discharged or partially leaked their contents at some point in their lifetime. Taking CO2 systems through as an example, although random checks may be suitable in some sectors, it is worth remembering that because the normal design concentration of CO2 of 34-72 v/v % is above the nearly immediate acute lethality level, these systems have an extremely narrow safety margin. As these systems work through oxygen dilution rather than the chemical disruption of the catalytic combustion chain (which is the case with other clean agents), insufficient oxygen levels during an accidental discharge may allow a situation to spiral out of hand. Yet although this poses high levels of risk to the service companies and the crew, because gaseous extinguishing systems are highly pressurised, the risk of leaking and discharging is accepted as part of their use and this is shown in the regulations that demand their upkeep.
Misunderstanding exists across parts of shipping industry regarding the application of a part of the IMO SOLAS FSS Code: the need for crew to test the contents of their CO2, FM-200® & NOVEC™ 1230 Gaseous Extinguishing Systems in between the periodic inspection, maintenance and certification intervals. These periodic inspections are conducted annually or biennially, and only by an Accredited Service Agent i.e. an external Marine Servicing Company. The reason IMO requires crew to test for contents in-between these is that the “ship sails alone” and “there is no such thing as a small fire at sea”; it must act as its own emergency fire service, differing to a land based asset.
Manual weighing is not only laborious, but also dangerous to the crew conducting the servicing. New technology allows ship owners and crews to help them both the spirit and letter of the regulation and thus know that their vessel is protected in the event of a fire.
The Portalevel ® MAX Marine liquid level indicator is designed primarily for the vessels’ crew to themselves inspect large fire suppression systems of up to 600 cylinders. The ease of operation in comparison to weighing, increases the ability of more regular and frequent checks, improving fire safety management onboard. Coltraco’s innovative method of inspecting leaking cylinders with ultrasonics, enables identification in under 30 seconds using Portalevel® with one person, instead of the traditional 15 minutes, with two people laboriously weighing.
Combined with the MAX Marine, The Portasteele® Calculator is an advanced calculator application, that converts the liquid level height of C02, NOVEC™ 1230 and FM-200® liquefied gaseous extinguishant agent readings taken on an ultrasonic non-destructive liquid level indicator device into the agent weight/mass.