How can ultrasonic technology cut down the ungoverned space?

Our experiences in the fire industry globally have included wonderful ones of professionalism and care from dedicated Fire Engineers and Risk Managers. Many of our products and systems today and others that we have under development are the direct result of advice and guidance that we have received from these very fine Fire Engineers. Set alongside these however are highly concerning anecdotal experiences:

  • Systems portrayed and installed by contractors as NOVEC™ 1230 but filled with sand or water.
  • High pressure gas systems without the means to actuate them.
  • Cheap pressure gauges sticking in position under humidity or mechanical fatigue.
  • Safety pins being retained in position in the cylinder valves after installation.
  • CO2 & marine CO2 systems with 20% of the CO2 cylinders installed on commercial shipping being empty or partially filled.
  • Over-filled and under-filled cylinders.
  • Pipework and cylinders freshly painted but with severe internal corrosion.
  • Room integrity testing with questionable results and with the room integrity remaining un-monitored after testing.
  • Liquefied extinguishants being confused by installers with Inert gas systems.
  • There exists a lack of understanding of the organic compounds of some liquid extinguishants and their corrosive effect on the cylinder in the event of condensate ingress.
  • Shipping companies not implementing the FSS code of the IMO SOLAS regulations.
  • We have been regularly asked how to operate portable Portalevel® liquid level indicators on dry powder extinguishers.

So how does ultrasonic technology cut ungoverned space within the fire industry down?

  • Ultrasound is merely acoustic (sound) energy in the form of waves of high frequency that are above the human audible range.
  • Portascanner® WATERTIGHT uses ultrasound to test the integrity of confined spaces and can detect leak sites as small as 0.06mm.
  • Portagauge® 3 uses ultrasound to test the internal and external corrosion on pipework and cylinder wall thickness to an accuracy of +/-0.1mm.
  • Globally we are known for the design and manufacture of 11 different model types of Portalevel® liquid level indicators. Accurate to +/-1.5mm for CO2, FM-200™ , NOVEC™ 1230, HFC-225 & 227, remaining Halon systems, FE-13™, FE-25™ and FE-36™. 

Request a Quotation

Online Submission

Click Here

Call: +44 207 629 8475

Our customer support line is open during UK
business hours
Mon-Friday, 9.00am - 5.00pm GMT

Email: sales@coltraco.co.uk

Enquire via email and a dedicated
member of the sales team will deal
with your request personally.

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok