Contact Us

Portasonic® 2.FL0

Brochure
Enquire

Handheld, clamp-on, transit time ultrasonic flow meter

The Portasonic® 2.FL0 is a handheld, clamp on, non-invasive ultrasonic transit-time flowmeter designed to measure flow rates liquids in pipes accurate to +/- 0.5% without requiring any invasive installation. It works on a wide range of liquid types containing less than 10% solid content, and pipes from DN15 – DN2500 made from different metal or plastic materials.

P/N: 2618949-PSO

Get help buying? Chat now, email or call +44 207 629 8475

Send Pricing & Information

Overview

Clamp on portable flow meter

The Portasonic® 2.FL0 handheld ultrasonic transit time flow meter has been tested and calibrated at an ISO 17025 laboratory, capable of meeting accuracies of +/- 0.5% of the true flow rate. We strive to offer the highest quality instruments, built with exceptional quality materials in the UK and remain competitively priced in the market worldwide through our unique R&D position. 

The different types of flow measured by the Portasonic 2.FL0 are:  

  1. Volumetric Flow Rate: such as litres per hour (l/h) or gallons per minute (gpm) etc. 
  2. Mass Flow Rate: such as kilograms per hour (kg/h) etc. 
  3. Heat or Energy Flow Rate: such as kilowatt hour (kWh) or British Thermal Unit (BTU) 

All measured values can be individually totalised giving you the total flow rate that has been measured during a particular measurement session. 

Some of the key advantages of Portasonic 2.FL0 over our competitors: 

  1. BUILD QUALITY: Our ultrasonic flow sensors are made using a special composite material to optimise ultrasound transmission. 
  2. BUILT-IN OSCILLOSCOPE: All units come with built-in oscilloscope for signal diagnostics that assists you in performing a reliable measurement as part of the setting up process 
  3. INTEGRATED THICKNESS GAUGE: Integrated ultrasonic thickness gauge allows you to perform simple NDT testing (ultrasonic thickness gauging) on the wall thickness of your pipe to determine wall thickness and look for signs of corrosion. 
  4. ISO 17025 CALIBRATION: Option to include ISO 17025 calibration certificate to verify the accuracy of your unit, we work closely with an established ISO 17025 flow laboratory in the UK to ensure our equipment meets your requirements 

Some of our main specifications (please see technical specifications below for full breakdown): 

  1. Works on pipes DN15 – DN 2500 
  2. Works on most clean liquids 
  3. Works on a wide range of pipe materials 
  4. Accurate to +/- 0.5% under ideal conditions  
  5. Measures flow velocities between 0.01 m/s – 25m/s 
  6. Resolution of 0.25mm/s 
  7. Repeatability of 0.15% of measured value 
  8. Main units rated IP65 
  9. Sensors rated IP66 
  10. Sensors temperature range -20°C to +150°C 
  11. Battery life up to 12 hours continuous use on a standard 9V PP3 battery for easy replacement 

Main benefits of choosing non-invasive ultrasonic transit time technology over inline flow measurement technology: 

  1. Clamp on, portable and non-invasive which allows a single instrument to be used across multiple different pipes / pipe sections 
  2. No installation costs such as drilling into pipes, therefore no downtime to the pipe network is present 
  3. As there is no contact with the fluid being measured, there is no risk of pressure loss throughout your pipe network 
  4. As with above, the fluid cannot damage the flowmeter, which could contribute to a longer lifespan and lower maintenance cost compared to inline flowmeters which are in contact with the fluid and risk being damaged by the pressurised flowing fluid  
Hide

What's In The Box

  Portasonic® 2.FL0 Main Unit: Handheld, portable and battery operated main electronic unit
  Pair of DM10 Standard Sensors for pipes DN15 – DN700 (set of 2) :Compact, ultrasonic flow measurement sensors
  Pair of Beaded Chain Clamps (set of 2):Metallic chain clamps for mounting flow measurement sensors with ease
  10mm – width Ultrasonic Thickness Gauge Probe:For thickness gauging applications (measures 2mm – 20mm)
  Measuring Tape:For measuring the distance between flow measurement sensors during set-up process
  Ultrasonic Couplant:For ensuring good contact between sensors and pipe wall
  User Manual: Contains further information regarding functionality of the instrument and how-to-use
  Installation Manual:Contains further guidance on how to install the flow measurement sensors on the pipe
  Calibration Certificate:As evidence that the unit has been tested and shown to be working before dispatch
  Robust Carrying Case:For portability and ease of carrying the equipment

Technical specifications

Technical Specification
Dimensions
  • Height: 220mm
  • Width: 85mm
  • Depth: 33mm
  • Weight: 434g
Pipe Diameter Range
  • Standard Sensor (Model No. DM10): DN15 – DN 700 (1/2” – 28”) 
  • Large Sensor (Model No. DS10): DN25 – DN2500 (1” – 98”) 

Works on a large variety of pipe materials (built-in database over 12+ materials) 

Accuracy

+/- 0.5% of measured value under ideal conditions 

Flow Velocity

0.01m/s – 25 m/s 

Resolution

0.25 mm/s 

Repeatability

0.15% of measured value 

Turn down ratio

1/100 

Measurement Rate

1 Hz as standard 

Measurement Units

Flow Velocity, Volumetric Flow Rate, Mass Flow Rate, Energy Flow Rate (Heat Quantity), Volume, Mass, Energy 

Display

Full 128 x 68 pixel graphics with backlight 

Additional Features
  • Integrated thickness gauging functionality, measures 2mm – 20mm range 
  • Signal oscilloscope for sensor positioning and diagnostics 
Power Supply

9V PP3 battery, up to 12 hours continuous use 

Operating Temperature

Main Unit: -10°C to +65°C  

Sensors: -20°C to +150° C  

IP Rating

Main Unit: IP 65 enclosure

Sensors: IP 66

Sensor Dimensions

Standard Model No. DM10: 40mm (L) x 20mm (W) x 25mm (D) 

Large Model No. DS10: 60mm (L) x 30mm (W) x 35mm (D) 

Sensor Material

Housing: Stainless Steel 

Front Face: PEEK (Polyetheretherketone) 

Cable Length

1.5m as standard (additional lengths available upon request) 

Certifications

CE, Coltraco is ISO 9001:2015 and ISO 14001 approved 

Warranty
  • Main unit – 3 Year Warranty
  • Sensor –  1 Year Warranty
  • Technical Support – Lifetime of the unit

See the Portasonic® 2.FL0 in action.

Frequently asked questions

The Portasonic® 2.FL0 works on a variety of different fluid types, as long as the speed of sound in the fluid is known. There is a built-in database of over 19+ fluids ranging from: water, sea water, kerosene, petrol, fuel oil, crude oil, Freon R134a, Freon R22, diesel oil, castor oil, F-76 fuel oil, Novec™ 1230, glycol/water, etc. There is an option to input custom fluid types as long as you know the speed of sound in the fluid – this can be found from online databases The Portasonic® 2.FL0 will also work on a variety of pipe material, as long as the speed of sound in the pipe material is known. There is a built-in database of over 12+ pipe material ranging from: carbon steel, stainless steel 304, stainless steel 316, cast iron, ductile iron, copper, PVC, lead, nylon, PE, aluminium, asbestos, fibre glass, etc. There is an option to input custom pipe materials as long as you know the speed of sound in the pipe material – this can be found from online databases
The Portasonic® 2.FL0 will work on pipes ranging from DN15 – DN2500 (1/2” – 98”). It is recommended that you notify us with the range of pipes you will be testing so we can allocate the appropriate sensor type for your application The Standard Sensors (Model No. DM10) will work from DN15 – DN700 (1/2” – 27”) The Large Sensors (Model No. DS10) will work from DN25 – DN2500 (1” – 28”)
The accuracy and reliability of the Portasonic® 2.FL0’s flow measurement is dependent on your flow profile and how full the pipe is with your fluid To achieve maximum accuracy and reliability, the pipe needs to be full with the fluid during measurement The Portasonic® 2.FL0 will work in fluids with up to 10% of gas or solid content. If your fluid contains a larger amount of solid content, a Doppler ultrasonic flow meter may be more suited for the application
If the paint layer is thin and in good condition, the Portasonic® 2.FL0 will work well on the painted surface If the surface of the pipe is corroded, or the paint layer is thick, it is generally recommended to remove the paint layer before measurement is taken
The Portasonic® 2.FL0 clamps on the pipe, is portable and non-invasive which allows a single instrument to be used across multiple different pipes / pipe sections There are no installation costs such as drilling into pipes, therefore no downtime to the pipe network is present As there is no contact with the fluid being measured, there is no risk of pressure loss throughout your pipe network As with above, the fluid cannot damage the flowmeter, which could contribute to a longer lifespan and lower maintenance cost compared to inline flowmeters which are in contact with the fluid and risk being damaged by the pressurised flowing fluid

Related Products

Portagauge® 5

The Portagauge® 5 is a multiple echo ultrasonic thickness gauge for measuring thicknesses of various metals and hard plastics, which ignores any coating up to 20mm in thickness.

P/N: 2099382-5

Learn More

Permaflow®

The Permaflow® is a fixed, clamp-on, ultrasonic transit time flow and heat meter that is non-invasive for measuring the flow rates of liquids containing less than 10% of gas/solid contents. It is mains powered, designed for 24/7 monitoring and is accurate to +/- 0.5% of measured value under ideal conditions.

P/N: 3578010-FLOW

Learn More

Portasonic® CALCULATOR

Calculate internal pipe pressures using external, non-invasive and portable flow sensors. To be used alongside the Portasonic 2.FLO® portable ultrasonic flow meter 

P/N: 2618949-CALC

 

Learn More

Our News

Coltraco Latest News

The latest news, technologies, and resources from our team.

View all posts

British manufacturer of ultrasonic technologies, exporting to 120 countries and winners of The Queen’s Award 2019.

Linkedin Instagram Facebook Twitter Youtube Pinterest

Products

Resources

Stay up to date

Subscribe to our newsletter

Please complete the fields below: